PILZEO

Elegant and cost-effective solution with cutting edge LED technology

  • Description
  • Characteristics
  • Dimensions
  • Photometry

 Design: Achilles Design

Installation height

3.5 to 5m

Lumen package range (nominal flux)

2000 to 6100 lm

Colour temperature

Neutral or warm white

Optical compartement tightness level

IP 66 (*)

Control gear tightness level

IP 66 (*)

Impact resistance (PC)

IK 08 (**)

Nominal voltage

230V - 50Hz

Electrical class 

I or II (*)

(*) according to IEC - EN 60598 (**) according to IEC - EN 62262

Weight

6.7kg

Materials

Cover

Polycarbonate

Base section

High-pressure die-cast aluminium

Gear tray

High-pressure die-cast aluminium

Protector

Polycarbonate

Colour

AKZO grey 900 sanded

 

 

CLASSIC LANTERN REVIVED WITH CONTEMPORARY DESIGN AND CUTTING EDGE TECHNOLOGY

 

       

 

ELEGANT AND COST-EFFECTIVE SOLUTION

The name of the post-top luminaire Pilzeo refers directly to the `Pilzleuchte' - litterally `mushroom luminaire' - a very popular type of lantern in German-speaking countries.
This classical form has been refreshed to provide a contemporary design for aesthetic continuity while generating massive energy savings. Based on the proven LensoFlex®2 engine, it provides a high-performance lighting solution to guarantee safety and well-being in public areas. 
 

ENERGY SAVINGS OF UP TO 85%

The Pilzeo luminaire integrates the latest cutting edge technologies. The combination of LEDs, a driver with a constant flux system and dimming makes
it possible to achieve energy savings that can reach up to 85% compared with luminaires equipped with traditional light sources.
With this very favourable energy balance, the Pilzeo luminaire contributes to the effective management of finances and to the responsible use of energy.

BACK LIGHT CONTROL TO PREVENT INTRUSIVE LIGHT

Some versions of the Pilzeo can be equipped with a Back Light Control system.
Thanks to an additional control plate inside the luminaire body, light spill from the back of the luminaire is minimised to avoid intrusive light on buildings.

FUTUREPROOF

The Pilzeo is FutureProof. Both the LED unit and the electronic assembly can be replaced, without any tools, to take advantage of future technological developments.


Side view

 

 

 

Fixation on Ø76mm pole (3 x 2 M6 screws)

 

 

 

Pilzeo

W

524mm

H

530mm

PILZEO - LENSOFLEX®2

Lifetime residual flux @ tq 25°C (**)

Number of LEDs

Neutral white (4000K)

8 LEDs

16 LEDs

24 LEDs

@100.000h

Current: 350mA

Nominal flux (lm)*

-

2400

3600

90%

Power consumption (W)

-

19

28

Current: 500mA

Nominal flux (lm)*

-

3100

4700

Power consumption (W)

-

26

39

Current: 700mA

Nominal flux (lm)*

2000

4000

6100

80%

Power consumption (W)

19

38

55

(*) The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data.
The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire.
Nominal flux depends on the type of LED in use and likely to change in accordance with the continuous and rapid developments in LED technology.
(**) In accordance with IES LM-80 - TM-21.

 

LIGHT DISTRIBUTIONS

LED optic 5068 - Square

 

LED optic 5068 - Urban road

 

LED optic 5121 - Large space

 

LED optic 5102 - Narrow street

 

LED optic 5103 - Medium street

 

LED optic 5098 - Wide street

 

Case Study

  • LensoFlex®2 16 LEDs @350mA
  • 4000K neutral white
  • 19W
  • MF = 0.85
  • S5 - classified street according to CIE 115
  • Installation height: 5m
  • Spacing between columns: 30m

 

By replacing the old luminaires equipped with 125W mercury vapour lamps the power consumption has been reduced by 85%.


If the luminaires had been fitted with 70W high-pressure sodium lamps, the Pilzeo would still generate 73% energy savings.

 

For 4,000 hours of use per year, for 1km of residential street, this corresponds to a consumption of less than 6.9kWh/day and emissions lower than 3.2kg eq
CO2 according to the average European equivalent of 0.46kg eq CO2/kWh.
The luminous efficacy of the Pilzeo allows to extend the spacing between two luminaires from 30 to 42m.
Further energy savings can be achieved by dimming and other control features.

Key features Cost-effective lighting solution Creation of ambiance Elegant design for low height installation FutureProof: LED unit and the electronic assembly can be replaced without tools Tool free access for maintenance Designed to incorporate Owlet range of control solutions

Contact us

+32 497 52 30 35 Email us

Information

Request a brochure Print this page

Your browser is currently not supported

Don't worry, there is an easy fix. All you have to do is click the link below and follow the instructions.

outdatedbrowser.com