- Installation and Maintenance
|Tightness level||IP 66 (*)|
|Impact resistance||IK 10 (**)|
|Nominal voltage||200 - 240V - 50 - 60Hz|
|Electrical class||EU class I or II (*)|
|(*) according to IEC - EN 60598 (**) according to IEC - EN 62262|
|Weight||5kg | 11lbs|
|Body||High-pressure die-cast aluminium|
|Protector||Polycarbonate anti -UV|
|Colour||AKZO grey 900 sanded|
|Any other RAL or AKZO colour upon request|
ELEGANCE AND COMFORT FOR A WARM AMBIANCE
AN ELEGANT DESIGN
The HapiLED luminaire perfectly integrates urban areas, from residential streets, squares, narrow or urban roads to bike paths and car parks.
This luminaire is composed of a mounting part and a top cover made of painted die-cast aluminium with a protector in anti-UV polycarbonate.
The ensemble offers a high tightness level and a high impact resistance.
VARIOUS LIGHTING DISTRIBUTIONS
The age of the opal sphere luminaire with high energy consumption and a source of light pollution is gone forever. Now, safety, comfort and energy efficiency for various environments is ensured through the LensoFlex®2 photometrical engine, which offers a wide range of light distributions.
The versatility of light distributions, from symmetrical to asymmetrical, make the HapiLED the perfect choice for a series of urban lighting applications.
A BROAD RANGE OF CONTROL OPTIONS
This luminaire proposes various control options: programmable drivers, remote management and motion detection features with a PIR sensor.
HapiLED luminaires are designed to meet our FutureProof concept, making them a timeless and future-oriented lighting solution. The LED photometric engine can be replaced on-site to take advantage of any future technological developments.
CONTROL OF LIGHT POLLUTION
In most countries, the standards regarding light pollution require the use of luminaires that drastically reduce the flux emitted in the upper hemisphere. With its ULOR of 3%, the HapiLED complies with CIE 150 ( ULOR <5%).
|A||410mm | 16.1"|
|B||556mm | 21.9"|
|HapiLED||Lifetime residual flux @ tq 25°C (**)|
|No. of LEDs||Neutral white (4000K)||16 LEDs||24 LEDs||32 LEDs||@100,000h|
|Driver current: 350mA||Typical luminaire output flux (lm)*||1700 to 1900||2500 to 2900||3400 to 3900||
|Power consumption (W)||19||28||36|
|Driver current: 500mA||Typical luminaire output flux (lm)*||2200 to 2600||3400 to 3900||4500 to 5200|
|Power consumption (W)||26||39||51|
|Driver current: 700mA||Typical luminaire output flux (lm)*||2800 to 3200||-||-|
|Power consumption (W)||38||-||-|
(*) The typical flux is an indicative luminaire flux @ tj 25°C. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution).
(**) In accordance with IES LM-80 - TM-21.
|LED optic 5068 - Symmetrical||LED optic 5096 - Asymmetrical|
|LED optic 5102 - Asymmetrical||LED optic 5103 - Asymmetrical|
|LED optic 5117 - Asymmetrical||LED optic 5118 - Asymmetrical|
|LED optic 5118 - Asymmetrical Backlight||LED optic 5121 - Symmetrical|
The HapiLED is fixed by 6 screws on the post-top fixation of the pole (60mm diameter).
HapiLED luminaires are designed to meet our FutureProof concept. Both the photometric engine and the electrical power supply can be replaced on-site to take advantage of any future technological developments.
The top cover of the HapiLED is composed of injected aluminum and can be removed by loosening 3 screws.
Key features Elegant and comfortable solution for creating a warm ambiance Low energy consumption Low light pollution (ULOR 3%) Several light distributions FutureProof: on-site replacement of the LED photometric engine Supplied pre-wired to facilitate its installation