MY
| Description | | MY 1: Luminaire consisting of an extruded aluminium alloy body sealed onto an extruded polycarbonate prismatic protector with high impact resistance IK 10; a removable sliding plate equipped with control gear on one side and lamp(s) on the other; one or two frames made out of injection moulded polycarbonate sealed onto the ends of the luminaire with one or two polycarbonate covers closed with two stainless-steel screws. This system ensures a tightness of IP 67 for the whole luminaire.
MY 2: Luminaire consisting of an extruded and painted aluminium alloy body sealed onto a borosilicate glass prismatic protector; a removable sliding plate equipped with control gear on one side and lamp(s) on the other; one or two aluminium frames sealed onto the ends of the luminaire with one or two die cast aluminium alloy covers closed with two stainless-steel screws. This system ensures a tightness of IP 67 for the whole luminaire.
Polyester powder coating.
| |
| Advantages | |
- High tightness luminaires (IP 67)
- Size adaptable to the lamp used
- Range of mountings
- MY 1: aluminium and polycarbonate: outstanding strength
MY 2: aluminium and glass: remarkable fire resistance
| |
| Characteristics | | Tightness level: IP 67 (*)
Aerodynamic resistance (CxS): MY 2 (881 mm): 0.022 m²
Impact resistance:
- MY 1 (PC): IK 10 (**)
- MY 2 (glass / PC): IK 06 / IK 10 (**)
Fire resistance: MY 2: M 1 (***)
Electrical insulation class: I or II (*)
Weight: See lamp table
(*) according to standard EN 60598
(**) according to standard EN 50102
(***) according to standard NF.P. 92507 | |
| Exploded View | |  |
| MY1
- Injection-moulded polycarbonate door, self coloured.
- Very short synthetic gasket inserted into the door of the luminaire: IP 67 tightness level.
- The door and inner frame system ensures complete tightness.
- Plug and socket connection system.
- Pull-out plate holding the control gear on one side and the lamp on the other.
- Large choice of lamps. Two lamps can be installed end to end or side by side.
- Optional narrow beam reflector.
- High tightness level (IP 67): protector sealed onto the body.
- High impact resistance level due to the extruded polycarbonate protector.
- Visual comfort: prismatic protector.
- Cable gland PG 13.
- Extruded aluminium alloy body.
- Stainless steel mounting brackets, coloured by Rilsan, pull-out and lockable version available.
| |  |
| MY2
- Earth terminal.
- Very short gasket guarantees an IP 67 tightness level.
- Synthetic strap holds the door during maintenance.
- Special anticorrosion paint (optional).
- Body made of extruded aluminium alloy with a semi-hexagonal section, which can be painted in any RAL colour.
- Semicylindrical protector made of extruded prismatic borosilicate glass.
- On request, the luminaire can be fitted, on both sides, with a door and inner frame system.
| |
| Dimensions | |  |
| MY1 | |  |
| MY2
| |
| Maintenance | | To gain access to the lamp and control gear, simply undo the two stainless steel captive screws of the side access door. A strap (MY 2) or double hinge (MY 1) holds the door during maintenance.
An extra-short gasket guarantees lifelong tightness, thus dispensing with the need for any internal cleaning.
| |  | | The MY 2 luminaire has undergone 30 kPa pressure and depression tests to meet, for example, the strict demands of lighting the Channel Tunnel.
| |  | | The plate to which the control gear and lamps are attached is easily removed in one piece.
| |  | | The door and inner frame system ensures absolute tightness, dispensing with the need for any internal cleaning.
| |
| Installation | |  |
| MY1
- By sprung stainless steel clips (Rilsan coating possible). | |  |
| MY1
- By stainless steel clips with vandal-resistant mounting (Rilsan coating possible).
| |  |
| MY1
- By stainless steel clips with pin-and-nut locking for vertical mounting.
| |  |
| MY1
- By mounting brackets.
| |  |
| MY1
- Direct mounting by screws and nuts.
| |  |
| MY1
- By transverse hinged mounting for installation in a continuous line. | |  |
| MY1
- On a Ø 60 mm tube.
| |  |
| MY1
- Sprung axial for installation on a Halfen rail.
| |  |
| MY1
- By lengthwise hinged mounting for installation in a continuous, recessed line.
| |  |
| MY2
- By stainless steel clips (Rilsan coating possible). | |  |
| MY2
- Sprung axial for installation on a Halfen rail. | |  |
| MY2
- By stainless steel clips with pin-and-nut locking for vertical mounting. | |
| Photometry | | One or two lamps
The MY range of luminaires can be fitted with one or two fluorescent lamps (18-58 W) and compact fluorescent lamps (7-55 W). The MY luminaires can also be fitted with a low-pressure sodium lamp (26-36 W).
The presence of two lamps ensures uninterrupted lighting in the event of one faulty lamp. The photometry depends on the number of lamps and how they are arranged.
Refractor protectors
The refractor protectors of the MY luminaires significantly cut down glare and provide a comfortable light distribution.
Reflector
The MY 1 luminaire can be fitted with a reflector which concentrates light distribution (one lamp only).
Colour filter
For special applications such as illuminating monuments, the MY 1 luminaire can be fitted with colour filters treated to withstand UV rays thus guaranteeing colour permanence.
| |  | | The fluorescent lamps can be placed singly, side by side or end to end, as desired.
| |  | | Light distribution of the MY 1 luminaire without reflector.
| |  | | Light distribution of the MY 1 luminaire with narrow beam reflector (1 lamp only).
| |  | | Colour filters for special lighting effects.
| |
| Options | |
- Aluminium reflector (MY 1)
- Special anticorrosion treatment (MY 2)
- Access door each side
- Colour filter
- Second cable gland
- Emergency version: integrated battery
| |
| | Lamps | |
| Lamp type | Max. Power | | Low Pressure Sodium | 36 W | | Fluorescent | 58 W | | Compact Fluorescent | 55 W |
| |
 2008 copyright© Schréder Group GIE |
