NOCTIS

NOCTIS MINI, MIDI, MAXI
Because of its’ mechanical design, installing the Noctis circular luminaires is a flexible process. Two types of installation methods are possible.

• Before the covering is put into place. The holding cylinder is positioned at the ground level without the covering. Then, the covering (for example concrete) is placed around the cylinder.
  Next, the sealed box is fixed into the cylinder together with the selected finishing plate. Mounting is by screws or clips (see table). An installation kit is supplied to help facilitate the operation.
• After the covering is put into place. A hole is drilled into the existing covering in order
  to position the holding cylinder. Next, the sealed box is fixed into the cylinder together with the selected finishing plate. Mounting is by screws or clips (see table).

DEPTH OF RECESSED FITTING
Always allow an additional space, depending on the type of connector used:

• Mini and Midi: 80 mm (50 mm with angled connectors)
• Maxi: 50 mm

NOCTIS MINI
With screws

NOCTIS MINI
With clips

NOCTIS MIDI
With screws

NOCTIS MIDI
With clips

NOCTIS MAXI

NOCTIS LINEA
The Noctis Linea luminaires can be positioned on the surface or recessed. If recessed, they are fixed via a rail or directly inserted into the covering (for example, concrete).

NOCTIS LINEA