SAPPHIRE

Description

Public lighting luminaire (IP 66 Sealsafe®) for lamps of up to 100 W (Sapphire 1), 250 W (Sapphire 2) or 600 W (Sapphire 3) made of: - body and cover in painted die cast aluminium alloy (polypropylene cover also available for Sapphire 1 and 2) - three-point closure system in die cast aluminium - a removable control gear plate - a tempered glass protector. A universal mounting piece allows vertical or side entry installation. Coating: polyester powder Standard colour: RAL 7035 Colour: any RAL or AKZO colour on request

Advantages

• IP 66 Sealsafe® maintained over time • High performance innovative photometry • Easilok® closure system (option: Sapphire 1 and 2) • Easy maintenance • Robust and recyclable materials: aluminium and glass

Materials
		GLASS PROTECTOR High impact resistance thanks to thermal tempering. Consistency in the level of transparency: absence of yellowing, immune to electrostatics. The characteristics are a determining element for the high maintenance factor of the optical compartment. Control of the effects of light pollution.
		SEALSAFE® The Sealsafe® system is a source of energy and maintenance cost savings. It guarantees an IP 66 tightness level for the optical compartment maintained over time. The system is based on the principle of a reflector that is permanently sealed to the protector and in which the lamp is accessed only by rotating/removing the plug equipped with an ultra-short gasket. The tightness level of the enclosure housing the optical compartment must be at least IP 44.

Characteristics

Optical compartment tightness level: IP 66 Sealsafe®(*) Control gear tightness level: - Sapphire 1: IP 44 (*) (option: IP 66) - Sapphire 2: IP 44 (*) (option: IP 66) - Sapphire 3: IP 44 (*) (option: IP 66) Aerodynamic resistance (CxS): - Sapphire 1: 0,057 m2 - Sapphire 2: 0,070 m2 - Sapphire 3: 0,090 m2 Impact resistance (glass/PC/PMMA): IK 08 / IK 08 / IK 06 (**) Nominal voltage: 230 V – 50 Hz Electrical insulation class: I or II (*) Weight (empty): - Sapphire 1: 5,9 kg (Alu) - Sapphire 2: 9,3 kg (Alu) - Sapphire 3: 11 kg  (*) according to standard IEC - EN 60598 (**) according to standard IEC - EN 62262

Exploded View

Control gear plate removable without tools. Three-point closure system in die cast aluminium. Cover in painted die-cast aluminium alloy. Polypropylene cover also available (Sapphire 1 and 2). Lampholder support plug with adjustment system for the positioning of the lamp allowing adaptation of the light distribution. Sealsafe®: The optical compartment has an IP 66 tightness level, maintained over time. Metallic hinges. Tempered glass protector: Transparency maintained over time. Load-bearing part made of painted die cast aluminium alloy. Flexibility of installation: a universal mounting piece allows vertical or side entry installation.

Easilok® locking system: option on Sapphire 1 and 2 equipped with a reflector made from synthetic material. Lowering the locking handle automatically positions and immobilises the plug. The voltage is automatically disconnected and the plug is removed by lifting the locking handle.

Dimensions

L H W Sapphire 1 520 mm 190 mm 285 mm Sapphire 2 720 mm 207 mm 335 mm Sapphire 3 819 mm 295 mm 365 mm

Maintenance
		EASILOK® Only available as an option on the Sapphire 1 and 2, with reflectors made from synthetic material (1632/1720/1523). By lowering the locking handle, this locking system automatically positions and immobilises the plug. Access to the lamp by lifting the locking handle. This simple action removes the plug and disconnects the power supply.

Installation

A universal mounting piece allows side entry or vertical installation of the luminaire. Mounting with 2 M8 Allen screws (Sapphire 1 & 2) or M10 (Sapphire 3).

Photometry
		HIGH PHOTOMETRIC EFFICIENCY The Sapphire range can be equipped either with a reflector made from synthetic material covered with a layer of highly pure vacuum-applied aluminium (Sapphire 1/2) or with a reflector in deep drawn, polished and anodised aluminium (Sapphire 1/2/3). These reflectors are particularly suited to quasi point source arc tube lamps and offer high photometric efficiency. In order to adapt the photometry, the lamp is adjustable.

Light distributions

SAPPHIRE 1 : Reflector 1770

SAPPHIRE 1 : Reflector 1632

SAPPHIRE 2 : Reflector 1963

SAPPHIRE 2 : Reflector 1523

SAPPHIRE 3 : Reflector 1289

SAPPHIRE 3 : Reflector 1869

Options

Sapphire 1/2 • IP 66 tightness level of the body (with aluminium cover) • Cover in grey polypropylene • Photoelectric cell • Polycarbonate protector treated to withstand UV rays (max. 150 W) or in acrylic (max. 100 W) • Flat glass protector for lamps up to 250 W • Internal adaptor for vertical mounting at 0° • Removable control gear plate in galvanised steel. • Anti-glare louvres • Easilok® locking system (only with reflectors 1632, 1720 and 1523) • Any RAL or AKZO colour Sapphire 3 • IP 66 tightness level of the body • Flat glass protector • Internal adaptor for vertical mounting at 0° • Photoelectric cell • Any RAL or AKZO colour

Lamps

Lamp type Max. Power High Pressure Sodium 600 W Metal Halide 400 W Metal Halide / ceramic arc tube 250 W Cosmopolis 140 W

 2009 copyright© Schréder Group GIE